5200A Multiparameter Monitoring and Control Instrument

Request a Quote For Replacement

This product has been discontinued and replaced with the IQ SensorNet process monitoring and control system. The IQ SensorNet offers enhanced capabilities and solutions for monitoring water quality in aquaculture facilities.

Designed specifically for Aquaculture Systems, the YSI 5200A,  AquaManager™ Software and AquaViewer II mobile app integrate process control, alarming, and data management into one solution. Simple enough to monitor one tank, powerful enough to manage a full scale farming operation from anywhere in the world. Simultaneously measure dissolved oxygen, pH, conductivity, ORP, salinity and temperature. YSI also offers a multi-channel dissolved oxygen monitor that can be networked with a 5200A or used independently. The 5500D can measure dissolved oxygen in up to four tanks/ponds using optical-based sensors which reduce maintenance and calibration requirements over traditional membrane-covered sensors.

• Overview

  Engineered specifically for recirculating aquaculture systems, the YSI 5200A continuous monitor and AquaManager® Software can be used to integrate process control, feeding, alarming, and data management into one product or can be used to simply monitor one tank. Powerful enough to manage a full scale farming operation from anywhere in the world yet simple enough for anyone to use.

  Access your facilities water quality data at any time with the AquaViewer App from the App Store or manage your network with AquaManager desktop software.

  • Multiparameter monitor: DO, Temperature, Conductivity, pH, ORP, Salinity
  • Ethernet TCP/IP or wireless communications
  • Event logging records calibrations, high and low conditions and more
  • Conditional feed timer with Feed Smart software included
  • Networking capability up to 32 instruments per comm port or can be integrated with 5400 Multi DO monitors
  • Graphic, backlit LCD - quick, reliable system status checks
  • Plug-and-play...easy to install and maintain with user-scalability - no need to hire consultants
  • Flexible monitoring and control software
  • Email and SMS alarming

  Feed Smart software manages food delivery based on user-selectable inputs to manage feed delivery based on number of daily feedings, daily feed weights, total biomass and FCRs, along with parameter control based on water quality values. interfaces with most auto feeders.

  AquaManager desktop software provides the ability to instantly see an overview of your facility, manage parameter set points, and conveniently manage data to make informed operation decisions. If you're interested in a continuous monitor for dissolved oxygen, please visit the 5500D (optical dissolved oxygen) or 5400 (galvanic dissolved oxygen) page.

  The YSI IOEM and REM expansion modules increase the flexibility and capability of the YSI aquaculture platform when networked with 5200A, 5400 or 5500D instruments. Configure 4 (IOEM-4) or 8 (IOEM-8) analog channels as inputs or outputs for the ability to integrate 3rd party sensors or output from other devices. Outputs can be configured to control pumps, UV systems, analog valves, or send data to SCADA/ PLC systems. REMs (Relay Expansion Module) add relays where needed to control feeders, lighting, heaters, alarming, and more.

• Specifications

  Buffer Recognition	Yes
  Certifications	RoHS, ETL, IP-65, NEMA 4X, CE, Made in USA, CUL, ULC
  Connectivity / Communications	Ethernet and wireless optional. Output Relays: 4 each 10 amp 115 VAC (5 amp 230 VAC) relays for parameter, control and/or alarm E-mail and/or SMS alarming up to 3 e-mails with Ethernet module or up to 10 e-mails with AquaMana, RS-485 and RS-232 standard
  Data Management	AquaManager™ Software integrates process control, alarming, and data management into one product
  Desktop Software Compatible	AquaManager®, Windows 2000/XP/Vista/Windows 7 operating systems
  Display	Back-lit graphic LCD (320 x 240) with timer, extended temperature range LCD
  Equipment used with	5562-4, or 20, or 30, AquaManager Desktop Software, 5561-4, 10, 20
  GLP Compliance	Yes
  Logging Capabilities	Yes
  Measurement Method / Channels	DO, pH, ORP, conductivity, temperature, 2 user-configurable inputs, digital (0 to 1.0 VDC, 0 to 5.0 VDC or 4-20 mA) Timers: 4 timers - 10 events cascading events start/duration 1 feed timer channel (feeder not included), Feed Smart software manages feed
  Memory	1000 data, 1250 relay/alarm, 1000 entries/change and 500 GLP records, Non-volatile
  Monitoring	Yes
  Multiparameter	Yes
  Operating Temperature	direct outside conditions with NEMA 4X enclosure, -15 to +70°C (5 to 158°F)
  Parameters Measured	Dissolved Oxygen (electrochemical), pH,ORP/Redox, Conductivity, Specific Conductance, Salinity, Total Dissolved Solids (TDS), Temperature
  Power	12 V DC, mobile live haul or anytime AC power not available
  User Calibratable	Yes
  User Replaceable	Yes
  Warranty	2-years instrument; 1-year probes and cable
  Waterproof	Yes

  Specification
  Timers	4 timers - 10 events cascading events start/duration 1 feed timer channel (feeder not included); Feed Smart software manages feed delivery, user-selectable inputs for number of daily feedings, daily feed weights, total biomass, FCRS and parameter control
  Field Upgradeable Software​	Yes; flash based
  Height	6.5 in, 16.5 cm
  Length	8.5 in, 21.6 cm
  Depth	4.75 in, 12.1 cm

  Parameter (units)	Range	Accuracy	Resolution
  Dissolved Oxygen* (% saturation)	0 to 500%	0 to 200%: ±2% or ±0.2 mg/L, whichever is greater; 200 to 500%: ±6% of reading	0.1% air saturation
  Dissolved Oxygen* (mg/L, ppm)	0 to 60 mg/L	0 to 20 mg/L: ± 0.2 mg/L or ±2% of reading, whichever is greater; 20 to 60 mg/L: ±6% of reading	0 to 10 mg/L: 0.01 mg/L  10 – 60 mg/L: 0.1 mg/L
  Temperature (°C, °F)	0 to +45°C (32 to 113°F)	±0.2°C	0.1°C
  Conductivity (µS, mS)	0 to 200 µS; 0 to 2000 µS 0 to 20 mS; 0 to 200 mS	0 to 100 mS: ±0.5% of range​ 100 to 200 mS: ±1.0% of reading	0.1 µS 1 µS 0.01 mS 0.1 mS (range dependent)
  Salinity (ppt)	0 to 80 ppt (0 to 50 ppt when entered manually)	±2% or ±0.1 ppt, whichever is greater	0.1 ppt​
  pH (pH units)	0 to 14 units	±0.2 units	0.01 units
  ORP (mV)	-2000 to +2000 mV	±20 mV	1 mV

  *Polarographic dissolved oxygen sensor

  Specifications indicate typical performance and are subject to change.

• Accessories

  

  AquaManager® Software

  AquaManager Software, Single and network use for 5200A, 5400, and 5500D instruments.

  

  Cap Membrane Kit 2.00 Mil PE

  Cap Membrane Kit 2.00 Mil PE (6 each), includes electrolyte (blue cap)

  

  REM-4 Relay Expansion Module

  Relay Expansion Module

  

  IOEM Input, Output Expansion Module

  Inputs and/or Outputs Expansion Module

  

  5562 Polarographic DO, Temperature, and Conductivity Cable

  The 5562 probe and cable assembly has replaced the discontinued 5561 probe and cable assembly.

  

  pH Kit

  pH Kit

  

  pH/ORP Kit

  pH/ORP Kit

  

  Zobell Solution, ORP Calibrator

  Zobell Solution, ORP Calibrator

  

  pH Buffer

  pH Buffer

  

  Conductivity Calibrator Solution

  Conductivity Calibrator Solution

  

  Internal Serial to Ethernet Device Kit

  Internal Serial to Ethernet Device Kit. Used with 5200A, 5400 and 5500D Instruments.

  

  5578 12-Volt Power Supply, 230 VAC Input

  12-Volt Power Supply, 230 VAC Input for 5200A, 5400, and 5500D instruments.

• How to Order

  Step 1: Order Instrument

  SKU	Description
  5200A-DC	Multiparameter monitor, 12 VDC, power supply not included
  5200A-AC	Multiparameter monitor, 110-240 VAC, with 115 VAC US cord
  606100	230 VAC cord, European
  606101	230 VAC cord, UK
  606102	230 VAC cord, Australia

  Step 2: Order Cable(s) and Sensors

  SKU	Description
  5562-4, -10, or -20	4-, 10-, or 20-meter cable with polarographic DO probe/Temp/Conductivity and pH or pH/ORP (order separately)
  5564	pH Sensor Kit (order calibration solutions separately)
  5565	pH/ORP Sensor Kit (order calibration solutions separately)
  5204	DO Cap Membrane Kit, 2 Mil Polytetrafluoroethylene (6 caps with electrolyte)
  5909	DO Cap Membrane Kit, 2 Mil PE (6 caps with electrolyte)

  Step 3: Order Software, Communications & Mounting Accessories

  SKU	Description
  5209A	AquaManager Desktop Software
  5205	Probe Mounting Kit
  5285	RS232 Opto isolator
  5402	Serial to Ethernet Module
  6505	Weather Shield
  6506	Desiccant Kit
  6509	Rail Mount Kit
  6510	Panel Mount Kit

• Video

  YSI Aquaculture Monitoring & Control Instrumentation

  Engineered specifically for aquaculture systems, the YSI 5200A continuous multiparameter monitor, 5500D continuous optical dissolved oxygen monitor and AquaManager® Software can be used to integrate process control, feeding, alarming, and data management into one product or can be used to simply monitor one tank. Powerful enough to manage a full scale farming operation from anywhere in the world yet simple enough for anyone to use.

• Reviews
  Write a review

  Name

  E-mail

  Review

  Rating

   

  Enter the text
  

   

• Application Notes
  • Understanding Ammonia in Aquaculture Ponds | A585
• Brochures and Catalogs
  • Aquaculture Applications Parameters & Capabilities | W25-10
• Manuals
  • YSI 5200A User Manual
  • YSI IOEM and REM Expansion Modules Safety and Installation Guide